Description:
PLA PLUS is one kind of composite of PLA, is one of the most widely used materials for 3D printing. Its toughness is stronger than ordinary PLA, it is not easy to break, it is very popular with customers, and it is also one of the most popular star products in our factory.
Characteristics:
1.Natural white, without adding any brightener;
2.MFI is lower than normal PLA
3.No fall down while surface printing.
4.Viscosity low , easy to remove support;
5.The temperature is correct and there is no burr phenomenon;
6. Good toughness not easy break , diameter accuracy +-0.03mm, 100% quality assurance;
7. Wide compatibility. PLA Filament is compatible with 99.99% of the FDM printers on the market.
Packing:
1kg /spool,10 Spools/ctn. Carton size: 44*35*23cm
0.25kg /spool, 20 Spools/ctn. Carton size: 45*38*23.5cm
*Package:1kg/Spool+seal+Box;
Filament data:
Physical Properties | Typical Value | Test Method |
Material Density | 1.21-1.30g/cm3 | GB/T1033.1-1986 |
Mechanical Properties | Typical Value | Test Method |
Tensile strength | 17-18 | 25um ASTM D1992 |
Tensile strength | ≥50Mpa | GB/T1040-1992 |
Elongation at break | 4.6-5.3% | GB/T1040.1-1992 |
Impact intensity (KJ/M,Izod2) | 1-3 | GB/T1043-1992 |
Thermal Properties | Typical Value | Test Method |
Vicat softening point | 61.5℃ | GB/T19466.2-2004 |
Melting Index(g/10min) | 4-6(190 ℃,2.15kg) | GB/T3682-2000 |
Melting point | 178.5 ℃ | GB/T19466-2004 |
Printing properties | Typical Value |
Printing temperature | 190-220 ℃ |
Hot Pad | 0-40℃ |
Fan layer | Off(Max20%) |
Size | N.W | G.W | Diameters | Packing Characteristics |
M | 300g | 450g | 1.75mm |
SmartBag ,Security Seal |
XM | 500g | 700g | 1.75mm/2.85mm/3.00mm |
SmartBag ,Security Seal |
L | 1000g | 1200g | 1.75mm/2.85mm/3.00mm |
SmartBag ,Security Seal |
http://www.3d-sting.com/